“3-in-1” reflective piping for optimal body contour recognition. Shoulder padding for breathing apparatus. Napoleon pocket with luminous yellow zip. Two adjustable radio pockets (digital/analogue). Lamp holder with safety snap-hook. Adjustable arm strap. YKK® panic zip in luminous yellow, easily exchangeable into utility model protected tunnel system. Inspection opening with access from both sides to the membrane and insulation side. Reflective tape based on HuPF part 1 + 4. Self-luminous back label “FIRE BRIGADE” (optional further labelling and/or second back label). Signal Velcro fastener with luminous red Velcro strip ensures visual recognition when the jacket is not properly closed. Tabs for attaching antennas and devices. Two fleece straps for name badges or for attaching collars. Ergonomic, pre-formed elbow area reinforced with silicone/carbon/Kevlar. Pockets and fastening with non-slip trimmings for easy opening even when wearing gloves. Snap-hook. Moisture barrier against creeping wetness.
Art No.112-200: Outer fabric: 82% meta-aramid/16% para-aramid/2% antistatic fibre. Moisture barrier: General-Electric® ePTFE membrane with GE® Direct Diffusion Technology. Thermal insulation/inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR. Reflective tape: yellow-silver-yellow. Colour code (01): black-blue.
Before and after washing instructions: empty pockets; close zips, Velcro and button fasteners; remove snap-hook; turn clothing inside out (lining facing outwards); use mild/colour detergent without an optical brightener (if possible; clean the black-blue outer fabric (colour code 01) using a detergent for black clothes); do not use fabric softener; do not use bleach; rinse out detergent residues thoroughly; air dry if possible; do not staple on labels; re-impregnation only required after 40 washes (then recommended after every 5th wash (pull clothes inside out again for this process)). Care instructions: gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning; do not bleach; drying with reduced thermal stress; iron at moderate heat at 150°C (2 points) to reactivate the outer fabric’s water and dirt-repellent finish; do not iron over the reflective stripes; gentle dry cleaning with perchlorethylene.
Normal sizes: 42/44-66/68 short sizes: K42/44-K66/68 long sizes: L42/44 – L66/68.
112-200 certified according to DIN EN 469:2020 sec. 6.2.6 + levels X2/Y2/Z2. The HuPF stripes on the NTi® jacket 112-200 also comply with DIN EN 469:2020, section 6.2.6, even without the pants (can be worn instead of a hi-vis vest; hi-vis vest exemption).
10 working days after payment.